Fan module with motor mount and base frame. Screwed into the inlet cone and adjusted to optimum immersion depth. Entire unit can be installed decoupled through vibration or spring damper elements. Drive motor in type IMB3, IMB5 version available on request. Standard version for installation with a horizontal motor shaft; with additional mounting rail, module can also be used hanging with vertical motor shaft. Fan module without base frame. Screwed into the inlet cone and adjusted to optimum immersion depth. Drive motor in type IMB5.
Properties
n
n
flow rates up to 60,000 m³/h
n
size: 250 - 1000 mm (impeller diameter)
n
backward curved impellers
n
IEC standard motors in type 3
n
can be installed in all positions
n
compact design
n
n
Motors
nIEC standard three-phase motors in IMB3 or IMB5 design. Protection class IP55, 400V/50Hz, thermal class F. The motors are suitable for operation with a frequency converter. The detailed information provided by the motor manufacturer for commissioning and maintenance, especially with regard to site provided motor protection devices, must be observed.
n
Motor protection
nAll motors have PTC thermistors inserted in the winding (motors with thermal contacts upon request), which automatically monitor the winding temperature of the motor. If wired correctly, they protect the motor from overload, failure of a mains phase, brake locking of the motor, and from air temperatures which are too high. The motor protection devices offered by us include the motor protection device in combination with PTC thermistors in the MSD1 K model. In general, the PTC thermistor can be connected directly to the frequency converter used.
n
Electrical connection
nThe drive motors are fitted with an outgoing cable. The electrical connection is made via a protection class IP44 terminal box which is supplied loose.
