The toothpick trick: To avoid spreading glue around the surface when you glue it, put a toothpick into the glue strip and press firmly. The toothpick will keep the height you need and keep the glue from spreading.
n
Better control: If you're using a cartridge, a good idea is to cut the nozzle with a triangular forcep, for a V-shaped edge to the nozzle. It makes it easier to control the flow of glue when you apply it.
n
n
n
nKey Notes:
n
n
n
n
n
n
n
Allow glue crusts or dried-on glue residues to soak and swell for several days before removing them.
n
Make sure to read the application and safety instructions given in our Technical Data Sheet and Safety Data Sheet.
n
n
n
n
Surface preparation:
n
n
n
n
n
n
Before applying the glue,ensure the surfaces to be bonded are clean and free from dust, grease or oil.
n
n
n
n
n
n
n
n
n
n
Adhesive application:
n
n
n
n
n
n
Cut off the top of the cartridge.
n
Screw the nozzle on the cartridge. Cut the nozzle to desired size, about 6mm width. Insert the cartridge into the gun.
n
n
n
n
n
n
n
n
n
n
Final application:
n
n
n
n
n
n
Depending on the size and shape of the object you want to glue, apply beads or drops to the back of the object to be glued.
n
Use a wet sponge to easily wipe away any excess glue
