high viscosity n nhigh strength n nhard to disassemble n nFlange sealing for filling large gaps immediate sealing effect, high temperature resistant n nColour nred n nViscosity at +25°C (+77°F) according to Brookfield n80.000 - 500.000 ht mPa·s n nMax. gap bridging n0,5 mm n nBreakaway strength (Thread) n12 - 18 Nm n nPrevailing stregth n18 - 24 Nm n nShear strength Nmm² (DIN 54452) n8 - 13 N/mm² n nHandling strength at room temperature n10 - 20 min. n nFinal strength (100%) after n3 - 6 h n nTemperature resistance n-60 to +200 °C n n*Strength values based on M 10 screws, 8.8 grade, thickness of nut 0,8.d Static shear strength based on cylindrical parts of abt. Ø 13 mm, tolerance (D-d) = 0,05 mm, l/d = 0,88 n nSurface pre-treatment n nIn general, WEICONLOCK does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on cleaned, degreased parts (use WEICON Surface Cleaner). If required, the parts should be slightly roughened. n nProcessing n nWEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). Apply continuous bead on one side of flange, join and tighten parts quickly. For sealing applications (pipe fitting) apply WEICONLOCK in circular motions on the thread. Screw pipe threads together and tighten until desired orientation. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended. n nStorage n nWEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.